Call: 715-386-8861
info@vikingelectronics.com

 

 

Current

Newsletter

 

Newsletter

 

CLICK HERE  to

download the newsletter

CLICK HERE  to answer

the trivia question


Software Downloads
 
 
Applications | Features | Specifications | More Info
 
   
K-2000-DVA
More Info

Technical Practice

K-2000-DVA (DBB)
(DOD#: 303)

Application Notes

Memory Chart
(DOD#: 871)

K-2000-DVA/RC-3/RC-2A Compatibility
(DOD#: 830)
(Call (715) 386-4345 and enter this number.)
 
Voice Alarm Dialing or Store Caster Announcements from up to Eight Inputs

Viking’s K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000- DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to 1 minute in length specific to that input.

Messages can be recorded locally or remotely with a total message time for all 8 inputs of eight minutes. When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.

The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.

Programming can be done with a Touch Tone phone or using a PC with a serial port connection and software available on the Viking website: http://www.vikingelectronics.com.

Applications
  • Alarm Dialer
    - Security/burglar/fire alarm notification
    - System alarm or equipment malfunction notification
    - Environmental warning notification
    - Automatic telephone messaging paging

  • Store Caster
    - Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc. “Customer assis- tance needed in aisle 13...”
Features
  • Non-volatile memory (no batteries required)
  • Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
  • 8 minutes of record time (1 minute per input)
  • Programmable message repeat counter
  • Programmable lap counter
  • Eight inputs programmable as normally open or normally closed and enabled or disabled
  • Programmable ring delay for remote programming and alarm polling
  • Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
  • Programmable resume timer for each input (time following reset for input to become active again)
  • Call progress detection
  • Programmable ringback limit for call progress
  • Remote security and access codes
  • Store caster mode
  • Local or remote programming and recording
  • RS-232 port for programming via a PC
  • Compatible with the RC-2A and RC-3 remote DTMF controllers
  • One year warranty
  • Made in the USA
Specifications
  • Power: 120V AC/12V DC 500 mA, UL listed adapter provided
  • Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
  • Shipping Weight: 1.02 Kg (2.25 lbs)
  • Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
  • Talk Battery: 12V DC
  • Touch Tone Dialing: 120 ms on/off, 50 ms on/off
  • CPC Detection Time: 320 ms minimum
  • Message Record Time: 8 minutes
  • Sampling Rate: 64 K (equivalent)
  • Input Detection Time: 80 ms with Qualifier Timer set to 0
  • Resolution Qualifier/Resume Timers: 1 second, with 18 hours maximum capacity
  • Connections: (1) RJ11 jack for telco connection, (1) 3.5mm jack for 600-ohm audio output, (1) 9 pin RS-232 for connection to PC, (1) 12 position screw terminal block for inputs
Home | What's New | Products | Distributors | About Viking | Support | Info Request | Search | Application Notes
Information... (715) 386-8861
info@vikingelectronics.com
Fax Back System... (715) 386-4345
Click here for International Sales
All Rights Reserved. Viking Electronics, Inc. © 1996-2002.
webmaster@vikingelectronics.com