M15W

• 25AE
• 30AE
• CPA-7B
• FBI-1A
• HF-3W
• K-600D
• M2W
• PA-2A
• PI-1
• ZPI-4

ZF301490

The M15W is designed to add more paging power to almost any amplified paging product, or it may be used as a primary paging amplifier. >BR>
Audio can be input from a 600 ohm source or from an 8-ohm amplified source. The 15 watt output can drive an eight to four ohm load, or two separate two-ohm loads, which simplifies installation of up to eight 8-ohm speakers. A

Note: The M15W is not compatible with talkback paging products such as the Viking HF-2WC and HF-3W.

• Increase the power range of these Viking products: PA-2A, CPA-7B, M2W, DVA-2W
• Add paging amplification to these Viking products: K-600D, CTG-1, MTG-10, PI-1, K-2000-DVA, FBI-1A, ZPI-4 and RAD-1
• Use as a primary paging amplifier from a 600-ohm source
• Use as an additional amplifier from an 8 ohm source

• Paging volume control
• Tone control
• 600 ohm input
• 8 ohm input
• 15 watts of paging power
• 1 year warranty
• Made in the USA

• Power: 120V AC/13.8 VAC 1.25A, UL listed adapter provided
• Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
• Shipping Weight: 1.0 kg (2.2 lbs)
• Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
• Paging Output: 15 watts - powers up to (8) 8-ohm speakers
• Frequency Response: 100 - 10K Hz
• Sound Pressure: 118 db @ 1 meter
• Speakers: (1) 25AE 8-ohm paging horn included, (8) maximum
• Maximum Speaker Run: 91m (300 ft) maximum 18 AWG
• Connections: 8 position screw terminal block