E-30-PT

• C-200
• C-2000B
• C-250
• E-30
• E-30-EWP
• E-30-PT-EWP
• E-35
• E-35-EWP
• SRC-1
• VE-5X5
• VE-5X5-SS
• VE-GNP
• VE-GNP-2
• VE-GNP-IG
• VE-GNP-SS
• VE-LIGHT

The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E-30-PT assures that the called party’s voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended.

The E-30-PT features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.

The E-30-PT-EWP shares all of the features of the E-30-PT in addition to Enhanced Weather Protection (EWP) for installation in harsh environments. EWP products feature rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming

• Non-ADA Hot-Line Phones for:
  -Terminals Stadiums
  -Parking lots/ramps
  -Convention centers
  -ATM machines
• Gate and Door Entry Phones for:
  -Business lobbies
  -Vehicular and pedestrian gates
  -Residences

• Push to talk button
• Phone line powered
• Vandal resistant, stainless steel faceplate with heavy-duty metal call button
• Non-volatile E2 memory (no batteries required)
• Touch Tone or pulse dialing
• Programmable to dial up to 5 numbers on busy or ring no answer
• Red off-hook LED indicator
• Hangs up on CPC, silence, busy signal, return to dial tone, time out or a Touch Tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-15°F to 130°F)
• E-30-PT-EWP has Enhanced Weather protection
• Flush mountable using included plastic rough-in box
• Optional VE-5x5 surface mount back box
• E-30-PT-EWP conforms to NEMA requirements

• Power: Telephone line powered (24VDC talk battery w/20mA loop current minimum)
• Minimum Ring Voltage: 90VAC RMS
• Dimensions: Overall-127mm x 127mm x 57mm (5” x 5” x 2.25”), Plastic Electrical Box-102mm x 102mm x 54mm (4” x 4” x 2.12”)
• Shipping Weight: 1 Kg (2.2 lbs)
• Operating Temperature: -26°C to 54°C (-15°F to 130°F) Humidity - E-30-PT: 5% to 95% non-condensing Humidity - E-30-PT-EWP: Up to 100% condensing
• Connections - E-30-PT: RJ11 jack
• Connections - E-30-PT-EWP: Gel-filled butt connectors