E-35-EWP

• C-200
• C-2000B
• C-250
• E-30
• E-30-EWP
• E-30-PT
• E-30-PT-EWP
• E-35
• SRC-1
• VE-5X5
• VE-5X5-SS
• VE-GNP
• VE-GNP-2
• VE-GNP-IG
• VE-GNP-SS
• VE-LIGHT

Enhanced Weather Protection

Integrate Viking video entry

The E-35 is a weather and vandal resistant handsfree video phone designed to provide quick and reliable handsfree communication and CCTV video of who is at your door or gate. The E-35 can be connected directly to a C.O. line, analog PABX/KSU station, or a Viking Door/Gate Controller: C-200, C-250 or C-2000B.

The E-35 features non-volatile memory, a built in dialer, a built-in high resolution color video camera, and intelligent call progress detection for automatic hang-up when the call is completed..

The E-35 can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered..

For extreme outdoor environments or corrosive atmospheres, the E-35 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, silicon sealed connections, anticorrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

Gate and Door Entry Phones for:


• Business lobbies
• Residences
• Auto or pedestrian gates
  
  Non-ADA Hot-Line Phones for:
  
  
• Elevators
• Stadiums
• Parking lots/ramps
• Convention centers
• ATM machines

• Built-in 5 number auto-dialer
• Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
• Audio and video transmission on one CAT5E cable (page 5)
• Vandal Resistant Features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal “Call” button, impact and scratch resistant camera lens and hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware
• Optional Enhanced Weather Protection (EWP) conforms to NEMA requirements
• Red “off-hook” LED
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder signal, maximum call time out and selectable silence time out
• Selectable auto-answer feature for monitoring
• Selectable push button disconnect
• Optional VE-5x5 surface mount box available
• Selectable maximum call time
• Selectable VOX switching speed

Entry Phone / Camera Specifications


• Operating Temperature: -34° C to 65° C (-30° F to 150° F)
• Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100%
• Connections: Standard model: (3) gel-filled butt connectors (3M Scotchlok UR2), EWP model: (5) gel-filled butt connectors (3M Scotchlok UR2)
  
  Entry Phone Specifications
  
  
• Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop (room temp), or 25mA (extended cold temp range).
• Dimensions: Overall: 127mm x 127mm x 57mm (5” x 5” x 2.25”), Plastic electrical box: 102mm x 102mm x 57mm (4” x 4” x 2.25”)
• Shipping Weight: 1.6 kg (3.5 lbs)
• Speaker Volume: Approximately 70 db maximum @1m
• Ring Voltage: 25V AC RMS minimum (for auto answer)
• CPC Disconnect Time: 500ms minimum
• REN #: 0.5 A
  
  Camera Specifications
  
  
• Power: 5-9V DC regulated 150mA (6V DC adapter included)
• Image Sensor: 1/4” color CMOS
• Video Output: 1 VP-P composite, NTSC, 75 ohms
• Resolution: 450 lines (640 x 480 / 307,200 pixels)
• Sensitivity: 0.26 LUX (20 IRE) F 2.0
• Lens: 3.4mm, pinhole 70° FOV (Field of View)
• Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° (see Diagram A)
• Maximum Wire Run Length: 150 ft with CAT5E (longer video runs possible w/ RG6 or RG59