|
 |
|
12" Analog Clock -
CL-A12
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
16" Analog Clock -
CL-A16
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Digital Clock with 2.5" Tall Numbers -
CL-D2
|
|
| Status: Current |
|
|
.jpg) Viking's Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking's 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That's it.
Viking's CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Digital Clock with 4" Tall Numbers -
CL-D4
|
|
| Status: Current |
|
|
.jpg) Viking's Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking's 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That's it.
Viking's CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Double Mount Housing for CL-A12 Analog Clocks -
CL-DMA12
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Double Mount Housing for CL-D2 Digital Clocks -
CL-DMD2
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Double Mount Housing for CL-D4 Digital Clocks -
CL-DMD4
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Clock RF
Transmitter -
CL-RFT
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Surface Mount Housing for CL-D2 Digital Clocks -
CL-SMD2
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Surface Mount Housing for CL-D4 Digital Clocks -
CL-SMD4
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Wire Guard for CL-A12 Analog Clocks -
CL-WGA12
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Wire Guard for CL-A16 Analog Clocks -
CL-WGA16
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Wire Guard for CL-D2 and CL-D4 Digital Clocks -
CL-WGD4
|
|
| Status: Current |
|
|
.jpg) Viking’s Wireless Clock System provides reliable, accurately synchronized clocks for your entire facility. Eliminating dedicated clock wiring can save you thousands of dollars on installation and also allows for easy retrofitting of an exisiting installation. The system is comprised of a CTG-2 master clock, a CL-RFT clock RF transmistter and Analog or Digital wireless slave clocks. Working on Viking’s 915-928MHz fequency hopping technology eliminates interference with other wireless products and requires no FCC license, eliminating extraneous fees. The received signal remains strong even under the effects of noise, obstructions or long distances which tend to decrease the signal to noise ratio. Installation is a cinch for our wireless clocks, just insert the batteries or connect power and hang them. That’s it.
Viking’s CL Series wireless clocks incorporate multi-function software as well as a microprocessor based movement. The clocks include automatic calibration, as well as enhanced diagnostic functionalities that allow the user to view the quality of the signal, how long since the last time the clock received a signal, and a comprehensive analysis of the clock itself and remaining battery life. The 12 and 16 inch wireless Analog clocks receive an RF clock data update every 4 hours (standard) or 12 hours (economy) allowing for a battery life of over 5 years. The 2.5 and 4 inch digital clocks are powered by an included 24V power adapter and receive an RF clock data update every minute.
Viking also offers a complete line of accessories for the Analog or Digital clocks such as: double mount housings, wire guards and surface mount housings (for digital clocks only).
|
| more info... |
|
|
Advanced Clock Controlled Tone / Message Generator -
CTG-2
|
|
| Status: Current |
|
|
.jpg) Viking’s model CTG-2 is an advanced clock controlled
tone/message generator designed to provide accurately timed
tones and/or messages over your existing paging system. This
provides a cost effective way of signaling school period changes,
factory shifts, breaks, lunch periods, etc.
The CTG-2 has four programmable
trigger inputs which are ideal for triggering emergency
alert tones/messages to indicate fire evacuation, severe
weather, lock down, all clear or can be used in store castor applications
for “customer service required” announcements, etc.
The CTG-2 comes equipped with up to 6 minutes of CD quality
WAV file audio storage for up to 14 different tone/messages. The
unit is factory loaded with common school, business and factory tones but can be programmed with your
custom tones/messages or updated from the list of Wav files from the Viking web site.
The CTG-2 can be programmed with up to 14 schedules and up to 1,000 events allowing you to program
an entire year or multiple years of schedules in advance. Once programmed you can change the CTG-2’s
schedules or turn the unit on or off remotely from any touch tone phone. The CTG-2’s extremely accurate
time base can be manually synchronized, synchronized with 50 or 60 Hz power or can be programmed to
periodically synchronize to the Atomic clock via its internal modem.
The CTG-2 comes with programming software and a USB port to allow PC programming of timed events, schedules, Atomic
clock synchronization, wave file down load, message volume, day light savings time, leap year, auxiliary relay control, etc.
|
| more info... |
|
|
ADA Compliant, Stainless Steel, Handsfree, Emergency Phone with Dialer/Announcer with Enhanced Weather Protection -
E-1600-02A-EWP
|
|
| Status: Current |
|
|
.jpg) The 1600A Series ADA Compliant Emergency Phones are
designed to provide quick and reliable handsfree communication
for any standard analog telephone line or analog
phone system station port. All 1600A Series
phones meet ADA requirements for elevator/ emergency
telephones, and can be programmed from
any Touch Tone phone. The phones can dial up to 5
programmable emergency numbers, as
well as 2 central station numbers. In addition,
the E-1600-20A and E-1600-52A
feature a second "INFO" button that will
dial up to 3 non-emergency numbers.
The 1600A Series phones can be programmed
to automatically deliver a digital
announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A
“Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location
numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and
are compatible with common Central Station Monitoring equipment.
For outdoor installations where the unit is exposed to precipitation or condensation, select 1600A Series phones are available with
Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt
connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP
switches for easy on-site programming. For more information, see DOD# 859.
|
| more info... |
|
|
FXO / FXS / Telecom Smart Paging Interface -
FXI-1
|
|
| Status: Beta |
|
|
.jpg) Viking’s FXI-1 universal paging interface allows you to provide paging from virtually any type of phone system instead of from a microphone. You can also provide background music and electronic night bell over the audio system.
The FXI-1 provides 30V talk battery for interfacing with an FXO or unused analog line input/trunk port. With the flip of a switch, the unit can connect to a FXS or PABX station ring trip port. No power supply is required in this mode. In the event that it must be connected to a “dry” 600 ohm paging port, the built-in voice activation (VOX) is in control. This configuration is useful when interfacing with systems that do not provide a paging contact closure, such as Panasonic, South Western Bell, Intertel, etc.
In all modes the FXI-1 provides normally open or normally closed relay contacts to activate the central paging amplifier equipment or connect to an external background music source. After paging, the FXI-1 auto disconnects on CPC, busy signal, silence or default disconnect timer. An electronic night bell over paging feature can be activated from a momentary phone system contact closure (FXO and page port mode only).
|
| more info... |
|
|
12 Circuit Ground to Loop Start Converter
-
GLS-12
|
|
| Status: Beta |
|
|
.jpg) Model GLS-12 is designed to allow up to 12 standard telephone sets, multi-line key systems or other loop start equipment to be connected to and operate on two-wire ground start CO trunk lines. The GLS-12 provides the CO ground start line with the signalling required to draw dial tone when the loop start equipment goes off-hook. Incoming calls are not affected by the GLS-12 and ring directly to the loop start devices.
|
| more info... |
|
|
Automated Voice Message Delivery System -
K-6000-DVA
|
|
| Status: Current |
|
|
.jpg) Model K-6000-DVA can automatically notify up to 1000 people
of an event or an event cancellation, school or business
closing or delayed opening. The K-6000-DVA is designed to
connect to a standard analog CO line, PABX station or VoIP
ATA or FXS port. To activate the unit, an authorized official
calls the K-6000-DVA, dials a 6 digit access code, selects a
pre-recorded message or records a live message up to 1
minute, then activates the unit via a touch tone command to
automatically call all the phone numbers in a pre-programmed
group. Up to 6 groups of phone numbers can be
pre-programmed into the unit. Alternatively, activating an “All
Call” command calls all pre-programmed numbers.
The K-6000-DVA can also be activated (or cancelled) by up to 8 external momentary push buttons
(not included). In the event any called number is busy or doesn’t answer, the unit will retry the unanswered
numbers several times (programmable 1-9) after all other numbers are called. The maximum
number of rings before calling the next number is programmable 1-8 rings (6-48 seconds). The unit
waits 2 seconds for touch tones after the message is delivered, if a * is detected, the message is
replayed once. For critical applications, the K-6000-DVA can be programmed to require a positive
confirmation - the called party must send a pre-determined touch tone to confirm that the message
was received. The K-6000-DVA can be programmed from your PC’s USB or RS-232 port.
|
| more info... |
|
|
Night Bell Over Paging Adapter -
K-600F
|
|
| Status: Beta |
|
|
.jpg) The K-600F eliminates the installation of multiple bells, relays, and power supplies, wherever night bells, loud ringing, or emergency tones are required. The K-600F provides an existing paging amplifier with a pleasant electronic warble tone each time it receives ring voltage from an analog PABX/KSU extension.
The K-600F requires no external power supply and provides a floating 600 ohm audio output. Paging In and Out terminals are provided to allow automatic switching between paging and warble audio when used with an existing paging installation. A set of N.O. / N.C. relay contacts are provided that switch in cadence with the ring signal. Volume and tone controls are also provided.
|
| more info... |
|
|
Line Concentrator
-
LC-3
|
|
| Status: Current |
|
|
.jpg) The LC-3 Line Concentrator allows up to three emergency phones to share a single line. A call initiated by any emergency phone is given the line. If a second emergency phone attempts to make a call while another emergency call is in use, the LC-3 will provide a busy signal until the line is available. Viking emergency phones can be programmed to redial on busy.
All inbound calls are answered by the LC-3. The emergency personnel then dials a touch tone command to connect to one of three phones.
A Fire Floor Phone port is provided as a means for local dedicated telephones to directly connect to any of the three emergency phones.
A secondary mode of operation allows two emergency phones to share an existing analog line of a phone system.
|
| more info... |
|
|
Line Powered Off Hook,
Ring and Message
Waiting Indicator -
LPL-1
|
|
| Status: Beta |
|
|
.jpg) The Viking model LPL-1 connects to any standard analog
phone line or phone system’s analog station port* to provide
visual “Ring” Indication, “On The Phone” indication and
“Message Waiting**” indication. The LPL-1 won’t have you
guessing which phone is ringing in busy offices. The large
flashing LED can be seen up to 100 feet away. When used
with a headset on an analog phone, you can end those nagging
interruptions that occur when associates don’t realize
you are on the phone because you are using a headset. The
LPL-1 will light steady indicating to everyone that you are on
the phone, flash during ringing or fast flash to indicate message
waiting**.
*Caution: The LPL-1 is not compatible with digital station ports.
**When installed on phone systems with standard 90VDC message waiting voltage.
|
| more info... |
|
|
Telephone Line Powered Ringer -
LPR-1
|
|
| Status: Beta |
|
|
.jpg) This auxiliary electronic ringer operates on any analog line that provides a minimum of 40 volts 20-30 Hz AC ring voltage. Nominal 3 KHz warble provides up to 92 dB SPL @ 1 meter. The LPR-1 can be connected via screw terminals or modular RJ-11 jack. A volume control and a 7 foot modular cord are provided. No power supply is required.
CLICK HERE to preview factory sounds for the LPR-1
|
| more info... |
|
|
Night Switch -
NS-1
|
|
| Status: Current |
|
|
.jpg) The NS-1 is a simple on-off toggle switch
mounted in a convenient plastic case. The
NS-1 can be used with Viking products that
have a “Night Switch” input or any product
that requires an external switch closure. The
compact design and foam mounting tape
make it easy to install the NS-1 almost anywhere
- right next to the equipment in a
phone closet or remotely at a front desk. The
NS-1 has 24” wires and comes with two
quick connectors.
|
| more info... |
|
|
Proximity Card Reader -
PROX-1
|
|
| Status: Beta |
|
|
.jpg) The model PROX-1 is a HID compatible 125KHz proximity card reader and is designed to be mounted directly to a metal door or window frame (mullions), making it ideal for applications requiring an access credential. The proximity card reader transmits data in 26-Bit Wiegand format, making it compatible with any of the Wiegand equipped Viking entry controllers.
The PROX-1 delivers non-contact read ranges up to 6 inches (152 mm), and operates from 5 to 14 VDC. Physical size is a compact 3.2 x 1.7 x 0.70 inches (80 x 43 x 17 mm). Mounting is simplified with horizontal and vertical mounting slots, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting. Concealing the mounting hardware, the PROX-1 ships with both Black and Ash (Off-White) covers standard.
|
| more info... |
|
|
Proximity Card Reader with Built-in Keypad -
PROX-2
|
|
| Status: Beta |
|
|
.jpg) The model PROX-2 is designed to be mounted directly to standard single-gang wall box, and integrates both a HID compatible 125KHz proximity card reader and keypad into a single-unit making it ideal for applications requiring an access credential and/or personal identification number (PIN).
The proximity card reader and keypad of the PROX-2 both transmit data in 26-Bit Wiegand format, making it compatible with any of the Wiegand equipped Viking entry controllers. The keypad is based upon cutting-edge, non-mechanical, capacitive technology, which, unlike membrane keypads, includes no moving parts prone to early failure. Advanced keypad enhancements include fully potted circuit board (EWP), keys with blue LED backlighting, raised key outlines and pip on the 5-key.
The PROX-2 delivers non-contact read ranges up to 6 inches (152 mm), and operates from 5 to 14 VDC. Physical size is a compact 4.6 x 3 x 0.70 inches (117 x 77 x 18 mm). Mounting is simplified with horizontal and vertical mounting slots, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting. Concealing the mounting hardware, the PROX-2 ships with both Black and Ash (Off-White) covers standard.
|
| more info... |
|
|
Medium Range Proximity Card Reader
-
PROX-3
|
|
| Status: Beta |
|
|
.jpg) The model PROX-3 is a high performance medium range HID compatible 125KHz proximity card reader. The PROX-3’s compact size yet long read range of up to 16 inches* make it ideal for parking control, gate access, turnstiles, etc. It is designed to be mounted directly to a wall, post, single gang electrical box or use an optional mounting kit for attaching it to a gooseneck pedestal. Mounting is simplified with horizontal and vertical mounting slots, which allow the reader to be conveniently adjusted and leveled. To increase vandal resistance the chassis is a single piece design with the mounting screws concealed behind a UV stable label.
The proximity card reader transmits data in 26-Bit Wiegand format, making it compatible with any of the Wiegand equipped Viking entry controllers. The PROX-3 is equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. With its sealed connections and fully potted electronics the PROX-3 is designed to meet an IP66 Ingress Protection Rating. For more information, see DOD# 859.
|
| more info... |
|
|
PROX-3 Mounting Kit -
PROX-3-MK-GNP
|
|
| Status: Current |
|
|
.jpg) The model PROX-3-MK-GNP is a mounting kit for attaching the PROX-3 proximity card reader to a VE-GNP gooseneck pedestal. The model PROX-3-MK-VEGNP is a mounting kit for attaching the PROX-3 proximity card reader and a VE-5x5, VE-6x7 or VE-5x10 (surface mount entry phone box) to a VE-GNP gooseneck pedestal. Both kits include the required mounting hardware and have mounting plates made from durable 3/8 inch thick black UV stable textured ABS plastic. The PROX-3-MK-VEGNP also comes with a gasket for sealing the back side of the VE surface mount box.
|
| more info... |
|
|
PROX-3 Mounting Kit -
PROX-3-MK-VEGNP
|
|
| Status: Current |
|
|
.jpg) The model PROX-3-MK-GNP is a mounting kit for attaching the PROX-3 proximity card reader to a VE-GNP gooseneck pedestal. The model PROX-3-MK-VEGNP is a mounting kit for attaching the PROX-3 proximity card reader and a VE-5x5, VE-6x7 or VE-5x10 (surface mount entry phone box) to a VE-GNP gooseneck pedestal. Both kits include the required mounting hardware and have mounting plates made from durable 3/8 inch thick black UV stable textured ABS plastic. The PROX-3-MK-VEGNP also comes with a gasket for sealing the back side of the VE surface mount box.
|
| more info... |
|
|
26 Bit Wiegand
Proximity Card -
PROXCARD-ISO
|
|
| Status: Current |
|
|
.jpg) The PROXCARD and PROXCARD-ISO are non-contact security cards that can be placed in front of a PROX-1, 2, 3, HID-2 or any 125KHz HID compatible proximity card reader to allow entrance into a secured area. The PROXCARD is a clam shell card made made from 0.070” thick plastic to resist bending and folding. A slot is provided at one end to allow a lanyard to be added for creating a “dog tag” style neck strap. The PROXCARD-ISO is a thin 0.032” thick flexible “ISO” style proximity card. Much like a credit card, the PROXCARD-ISO is perfect for storing in your wallet.
The PROX-FOB is a proximity key ring fob with brass eyelet designed to attach to a key chain or necklace. The PROX-FOB’s compact size is only 1.5” x 1.2” x 0.15” making it one of the smallest available.
The cards and fobs are pre-programmed with a standard 26 bit Wiegand format consisting of a three digit facility code and a five-digit card number. The range of facility codes is from 2 to 254, and the card numbers range from 1 to 65,534. The actual card number can be printed on a label and placed on the back of each card for easy reference, or the card number can be offset by a fixed value for security purposes.
When ordering, the quantity, facility code, and starting card number along with the card number printing must be specified.
|
| more info... |
|
|
Network Enabled Relay Controller -
RC-4
|
|
| Status: Beta |
|
|
.jpg) The RC-4 Network Enabled Relay Controller provides networked control of four remote relays via a web interface. The same interface can be used to check the status of four contact closures at the remote location.
Relays can be toggled on or off, or user-programmed timed closures can be activated. Two levels of user access permit selected users to have full operational and programming rights while others have operational control but not programming capability.
|
| more info... |
|
|
Infrared Remote Controllable Paging Horn for SA-Series -
SA-1H
|
|
| Status: Current |
|
|
.jpg) The Viking model SA-1H is a 5 inch paging horn that includes a 1.5 watt power amplifier, an infrared remote control detector, and an integrated digital volume control. The SA-1H self amplified paging horn uses a proprietary two wire protocol in which both 40 volts DC power and audio are combined on the same pair of wires. It is designed for direct connection to the Viking Model SA-25 Self Amplified Paging Control unit, or use the Viking model SA-X12 expander/adapter to connect it to virtually any existing paging system.
The SA-1H includes an infrared receiver to accept volume control signals from a Viking Model SA-IR remote control. Aim the infrared transmitter at the receiver and press the buttons. The up/down buttons allow users to set the appropriate volume level for each speaker. The speaker provides an audible “beep” feedback tone to let the user gauge the volume level even when there’s no background music (or page) playing at the time.
|
| more info... |
|
|
Infrared Remote Controllable Ceiling Speaker for SA-Series -
SA-1S
|
|
| Status: Current |
|
|
.jpg) The Viking model SA-1S is an 8 inch paging speaker that has a built in 1.5 watt power amplifier, an infrared remote control detector, and an integrated digital volume control, all built into an attractive off-white grill for flush mounting in office ceilings. The SA-1S self amplified paging speaker uses a proprietary two wire protocol in which both 40 volts DC power and audio are combined on the same pair of wires. It is designed for direct connection to the Viking Model SA-25 Self Amplified Paging Control unit, or use the Viking model SA-X12 expander/adapter to connect it to virtually any existing paging system.
The SA-1S speaker includes an infrared receiver to accept volume control signals from a Viking Model SA-IR remote control. Aim the infrared transmitter at the speaker and press the buttons. The up/down buttons allow users to set the appropriate volume level for each room. The speaker provides an audible “beep” feedback tone to let the user gauge the volume level even when there’s no background music (or page) playing at the time.
|
| more info... |
|
|
Self Amplified Paging Control Unit with IR Remote -
SA-25
|
|
| Status: Current |
|
|
.jpg) The SA-25 can directly drive up to 25 self amplified
speakers. Speakers can be the Viking model SA-1S
self amplifier ceiling speaker, the Viking model SA-1H
self amplified paging horn (pending). The SA-25 is
backwards compatible with the older legacy Valcom
and Bogen self amplified speakers, or any combination
of the above. The Viking self amplifier speakers
have the added advantage of only requiring a one pair
wire loop to install all the non polarity sensitive speakers.
The provided SA-IR Infrared Remote controls
volume, mute, and enable/disable background music
at each speaker as required.
The SA-25 provides paging, loud ringing, and background music when connected to electronic or 1A2 Key
systems, PABX’s, No-KSU phones, multi-line phones, as well as IP phone systems (that have an analog
FXS or FXO port). The SA-25 paging control unit can interface with a paging port or a ringing analog FXS,
CO/Centrex line, PABX/KSU station port or an FXO, unused telephone line input (trunk port).
The SA-25 will generate loud ringing from a ringing analog line or from a dry contact closure. Either a loud
electronic warble sound or one of three other soft chime sounds may be selected. An external “night transfer” switch can
be added to turn loud ringing on or off in night bell applications. If a music source is connected to the SA-25, background
music can be enabled or disabled at any Viking self amplifier speaker using the provided SA-IR infrared remote control.
Background music is inhibited during paging. The SA-25 is easy to install and comes complete with a power supply. The
Viking model SA-X12 Expander / Adapter can be used if additional self amplified speakers are required.
|
| more info... |
|
|
Infrared Remote for SA-Series
Self-Amplified Paging System -
SA-IR
|
|
| Status: Current |
|
|
.jpg) The Viking model SA-IR is a three button infrared remote control for use with the Viking Model SA-1S and SA-1H (pending) self amplified paging speakers. Aim the infrared transmitter at the speaker and press the buttons. The up/down buttons allow users to set the appropriate volume level for each room. The speaker provides an audible “beep” feedback tone to let the user gauge the volume level even when there’s no background music (or page) playing at the time.
|
| more info... |
|
|
Self Amplified Paging
Expander/Adapter -
SA-X12
|
|
| Status: Current |
|
|
.jpg) The Viking SA-X12 expander / adapter is an economical
way to expand an existing paging system, while adding
remote control to the new speakers. The SA-X12 can be
connected to any existing paging audio source including
600 ohm line level, 4, 8, or 16 ohm speaker level, or
even 25 volt and 70 volt paging systems. It can also be
connected directly to the 2-wire protocol (40VDC +
Audio) of another SA-X12 or the Viking SA-25 paging
controller to add even more self amplified speakers.
The SA-X12 takes audio from any paging or background
music source, and combines it with 40 volts DC
to run Viking self amplified speakers. The added Viking SA Series speakers will have the features
of the existing paging system, plus have the added feature of being remote controllable.
The SA-X12 can directly drive up to 12 Viking self amplified speakers which include the model
SA-1S self amplifier ceiling speaker, and the SA-1H self amplified paging horn. Viking self amplified
speakers have these advantages: 1) Audio and power are on the same pair (less copper). 2) Power is
40VDC for lower current and smaller gauge wire (less copper then older 4-wire 24 volt systems). 3) Non-Polarity
sensitive for easier wiring. 4) Each speaker is infrared remote controllable so there is no need to install volume
controls on the walls, or climb up ladders to adjust the volume.
The SA-IR Infrared Remote and SA Series speakers are available separately.
|
| more info... |
|
|
Talk Battery Booster -
TBB-1B
|
|
| Status: Current |
|
|
.jpg) The TBB-1B will boost talk battery voltage up to 48VDC, and current up to 26mA on single analog line extensions behind PABX’s and electronic key systems. This is helpful for powering line powered devices such as touch tone dialers and emergency phones on low voltage and/or low loop current extensions.
When the TBB-1B is being used, the power LED lights extra bright to show activity. The TBB-1B is not compatible with Pulse/Rotary dialing.
|
| more info... |
|
|
Oil Rubbed Bronze Single Gang Mountable Camera -
VCAM-2-BN
|
|
| Status: Beta |
|
|
.jpg) The VCAM-1 and VCAM-1IR are high resolution color composite video cameras. Their compact size will allow mounting in even the smallest locations. The extreme temperature rating of this camera, makes it ideal for mounting in outdoor locations in a water tight enclosure.
The VCAM-2 is a compact, high resolution color composite video camera mounted behind a standard single gang wall plate. The VCAM-2 is available in two finishes: Brushed Stainless Steel (VCAM-2-SS) and Oil Rubbed Bronze (VCAM-2-BN). The extreme temperature rating and Enhanced Weather Protection make this camera ideal for mounting in outdoor locations.
The VCAM-1 is not compatible with IR illuminators and is a direct replacement for the cameras included in the following Viking models: AES-2005, E-35, E-50, E-65, E-75, K-1205, K-1705-3 and W-3005.
The VCAM-1IR has a day/night OLP (optical low pass) filter and is compatible with standard 840-850nM IR illuminators. The VCAM-1IR is the same size as the VCAM-1 allowing it to be used in all of the above Viking products.
All cameras are equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. The VCAM-1, VCAM-1IR and VCAM-2 feature sealed connections, as well as an epoxy potted circuit board.
|
| more info... |
|
|
Brushed Stainless Steel Single Gang Mountable Camera -
VCAM-2-SS
|
|
| Status: Beta |
|
|
.jpg) The VCAM-1 and VCAM-1IR are high resolution color composite video cameras. Their compact size will allow mounting in even the smallest locations. The extreme temperature rating of this camera, makes it ideal for mounting in outdoor locations in a water tight enclosure.
The VCAM-2 is a compact, high resolution color composite video camera mounted behind a standard single gang wall plate. The VCAM-2 is available in two finishes: Brushed Stainless Steel (VCAM-2-SS) and Oil Rubbed Bronze (VCAM-2-BN). The extreme temperature rating and Enhanced Weather Protection make this camera ideal for mounting in outdoor locations.
The VCAM-1 is not compatible with IR illuminators and is a direct replacement for the cameras included in the following Viking models: AES-2005, E-35, E-50, E-65, E-75, K-1205, K-1705-3 and W-3005.
The VCAM-1IR has a day/night OLP (optical low pass) filter and is compatible with standard 840-850nM IR illuminators. The VCAM-1IR is the same size as the VCAM-1 allowing it to be used in all of the above Viking products.
All cameras are equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. The VCAM-1, VCAM-1IR and VCAM-2 feature sealed connections, as well as an epoxy potted circuit board.
|
| more info... |
|
|
Universal Visual Indicator -
VR-1B
|
|
| Status: Current |
|
|
.jpg) When used with an analog phone line, the VR-1B will provide “ring” indication, “on the phone” indication and “message waiting” indication for both “stutter dial tone” and standard message waiting voltage. In this application the VR-1B connects directly to tip and ring.
When used with electronic or digital phones, the VR-1B won’t have you guessing which phone is ringing in busy offices. The flashing LED can be seen up to 100 feet away. The VR-1B connects directly to the electronic phone’s speaker.
When used with a headset, you can end those nagging interruptions that occur when associates’ don’t realize you are on the phone because you are using a headset. The VR-1B will flash on and off indicating to everyone that you are on the phone and you are not to be disturbed. The VR-1B installs in the handset/headset jack using an included “T” adapter.
|
| more info... |
|
|
|
|
x.jpg){kind=small}
