ADA Compliant Flush Mount Stainless Steel VoIP Emergency Phone with Built-In Dialer and Digital Voice Announcer
Model: E-1600-02-IP
ADA Compliant Flush Mount Stainless Steel VoIP Emergency Phone with Built-In Dialer and Digital Voice Announcer
Model: E-1600-02-IP
Find A Distributor
Product Details
The E-1600-02-IP ADA and CE Compliant VoIP Emergency Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-02-IP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phone can dial up to 5 programmable emergency numbers.
The E-1600-02-IP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. All units are PoE powered.
For outdoor installations where the unit is exposed to precipitation or condensation, use model E1600-02-IPEWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.
Applications
- Elevators
- Parking ramps / lots
- Emergency pool phones
- ATM machines
- Medical centers
- Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
- Area of refuge locations
- Lobbies
- Entryways
- Campus emergency stations
- Stadiums
- Convention centers
- Public access areas
Features
- Automatic polling and programming software included
- 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
- Red “Call Connected” LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Network downloadable firmware
- Handsfree operation
- Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location ID code or voice announcement
- Grade 2 Braille label for the visually impaired
- Non-volatile digital voice announcer with 28 seconds of voice memory
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Diagnostics for testing mic, speaker, relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Specifications
- Power: PoE class 1 (<4 Watts)
- Dimensions: 13″ x 10.5″ x 2.0″ (330mm x 267mm x 51mm)
- Shipping Weight: 7 lbs (3.18 kg)
- Operating Temperature: -40°F to 140°F (-40°C to 60°C)
- Humidity: 5% to 95% non-condensing
- Material: 12 gauge steel with #4 brushed finish
- Maximum Sound Pressure: 90dB SPL @ 1m
- SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
- Audio Codecs: G711u, G711a, G722
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
- Mounting: Flush mount in elevator cabs, ATMs, stairwells, hallways, etc.
- Suggested Hardware: (6) #8 x 0.75″ flat head phillips sheet metal type A screws (not included)
- Connections: (1) RJ45 10 / 100 Base-T, (3) gel-filled butt connectors
Certifications
- CE
- Canada ICES
- FCC Part 15
- ADA
- SIP
