E-1600-02-IPEWP - VoIP Emergency Phone | Viking Electronics

Customer Service (715) 386-8861

ADA Compliant Flush Mount Stainless Steel VoIP Emergency Phone with Built-In Dialer, Digital Voice Announcer, and Enhanced Weather Protection

Find A Distributor

Product Details

The E-1600-02-IPEWP ADA and CE Compliant VoIP Emergency Phone is designed to provide quick and reliable handsfree emergency communication for SIP VoIP phone systems with PoE. The E-1600-02-IPEWP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phone can dial up to 5 programmable emergency phone numbers.

The E-1600-02-IPEWP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency phone call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

The E-1600-02-IPEWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the emergency phone unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.


Applications

  • Elevators
  • Parking ramps / lots
  • Emergency pool phones
  • ATM machines
  • Medical centers
  • Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
  • Area of refuge locations
  • Lobbies
  • Entryways
  • Campus emergency stations
  • Stadiums
  • Convention centers
  • Public access areas

Features

  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red “Call Connected” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Handsfree operation
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a unique location ID code or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Programmable to dial up to 5 numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Diagnostics for testing mic, speaker, relay
  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)
  • Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

Specifications

  • Power: PoE class 1 (<4 Watts)
  • Dimensions: 13″ x 10.5″ x 2.0″ (330mm x 267mm x 51mm)
  • Shipping Weight: 7 lbs (3.18 kg)
  • Operating Temperature: -40°F to 140°F (-40°C to 60°C)
  • Humidity: Up to 100%
  • Material: 12 gauge 316 stainless steel with #4 brushed finish
  • Maximum Sound Pressure: 90dB SPL @ 1m
  • SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Mounting: Flush mount in elevator cabs, ATMs, stairwells, hallways, etc.
  • Suggested Hardware: (6) #8 x 0.75″ flat head phillips sheet metal type A screws (not included)
  • Connections: (1) RJ45 10 / 100 Base-T, (3) gel-filled butt connectors

Certifications

  • EWP
  • IP66
  • CE
  • Canada ICES
  • FCC Part 15
  • ADA
  • SIP