E-1600-03-IPEWP – Viking Electronics

ADA Compliant Vandal Resistant Surface Mount Stainless Steel VoIP Emergency Phone with Enhanced Weather Protection

Find A Distributor

Product Details

The E-1600-03-IPEWP ADA and CE Compliant VoIP Emergency Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-03-IPEWP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phones can dial up to 5 programmable emergency numbers.

The E-1600-03-IPEWP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

The E-1600-03-IPEWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.


Applications

  • Elevators
  • Parking ramps / lots
  • Emergency pool phones
  • ATM machines
  • Medical centers
  • Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
  • Area of refuge locations
  • Lobbies
  • Entryways
  • Campus emergency stations
  • Stadiums
  • Convention centers
  • Public access areas

Downloads


Features

  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red “Call Connected” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Handsfree operation
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a unique location ID code or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Programmable to dial up to 5 numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Diagnostics for testing mic, speaker, relay
  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)
  • Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

Specifications

  • Power: PoE class 1 (<4 Watts)
  • Dimensions: 7.22″ x 5.36″ x 1.55″ (183mm x 149mm x 39mm)
  • Shipping Weight: 3 lbs (1.36 kg)
  • Operating Temperature: -40°F to 140°F (-40°C to 60°C)
  • Humidity: Up to 100%
  • Material: 14 gauge 316 stainless steel with #4 brushed finish
  • Maximum Sound Pressure: 90dB SPL @ 1m
  • SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Mounting: Surface mount to walls, posts, single gang boxes, or 4″ x 4″ electrical junction boxes; recess mount in elevator phone boxes
  • Connections: (1) RJ45 10 / 100 Base-T, (3) gel-filled butt connectors

Certifications

  • EWP
  • IP66
  • CE
  • Canada ICES
  • FCC Part 15
  • ADA
  • SIP