ADA Compliant VoIP Emergency Phone Parts Kit with Built-In Dialer, Voice Announcer and Enhanced Weather Protection (EWP)
Model: E-1600-50-IPEWP
ADA Compliant VoIP Emergency Phone Parts Kit with Built-In Dialer, Voice Announcer and Enhanced Weather Protection (EWP)
Model: E-1600-50-IPEWP
Find A Distributor
Product Details
The E-1600-50-IPEWP ADA and CE Compliant VoIP Emergency Phone Parts Kit is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-50-IPEWP is designed to be installed behind a custom panel, meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phones can dial up to 5 programmable emergency numbers.
The E-1600-50-IPEWP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.
The E-1600-50-IPEWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.
Applications
- Elevators
- Parking ramps / lots
- Emergency pool phones
- ATM machines
- Medical centers
- Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
- Area of refuge locations
- Lobbies
- Entryways
- Campus emergency stations
- Stadiums
- Convention centers
- Public access areas
Features
- Automatic polling and programming software included
- 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
- Red “Call Connected” LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Network downloadable firmware
- Handsfree operation
- Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location ID code or voice announcement
- Grade 2 Braille label for the visually impaired
- Non-volatile digital voice announcer with 28 seconds of voice memory
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Diagnostics for testing mic, speaker, relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Specifications
- Power: PoE class 1 (<4 Watts)
- Dimensions: 3.58″ x 2.71″ x 0.8″ (91mm x 69mm x 20mm)
- Shipping Weight: 1.0 lb (0.45 kg)
- Operating Temperature: -40°F to 140°F (-40°C to 60°C)
- Humidity: Up to 100%
- Maximum Sound Pressure: 90dB SPL @ 1m
- SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
- Audio Codecs: G711u, G711a, G722
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
- Mounting: Mount behind your custom panel
- Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors, (2) crimped terminals
Certifications
- EWP
- IP66
- CE
- Canada ICES
- FCC Part 15
- ADA
- SIP