E-1600-TP2IPEWP – Viking Electronics

ADA Compliant Two Button VoIP Emergency Phone Replacement for Talk-A-Phone Applications, with Built-In Dialer, Voice Announcer and Enhanced Weather Protection (EWP)

Find A Distributor

Product Details

The E-1600-TP2IPEWP ADA and CE Compliant VoIP Emergency Phone Replacement is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-TP2IPEWP phone meets ADA requirements for emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address.

The E-1600-TP2IPEWP is designed to be used with Talk-A-Phone towers, stanchions, pedestals, as well as surface, wall and flush mount enclosures. The Help button can dial up to 5 programmable emergency numbers, and the Info button can dial up to 5 programmable non-emergency numbers.

The E-1600-TP2IPEWP can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Additionally, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

The E-1600-TP2IPEWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.


Applications

  • Replacing damaged or malfunctioning Talk-A-Phone panel phones
  • Campus Security Sites
  • Area of Refuge sites
  • Parking Ramps / Lots
  • Automated Tellers (ATM)
  • Entryways
  • Roadside Emergency Sites
  • Stairwells in Public Buildings

Downloads


Features

  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red “Call Connected” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Handsfree operation
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a unique location ID code or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Help button dials up to 5 emergency numbers
  • Info button dials up to 5 non-emergency numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Diagnostics for testing mic, speaker, relay
  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)
  • Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

Specifications

  • Power: PoE class 1 (<4 Watts)
  • Dimensions: 9.5” x 11.75” x 2” (241mm x 299mm x 51mm)
  • Shipping Weight: 6.4 lbs (2.9 kg)
  • Operating Temperature: -40°F to 140°F (-40°C to 60°C)
  • Humidity: Up to 100%
  • Material: 12 gauge 316 stainless steel with #4 brushed finish
  • Maximum Sound Pressure: 90dB SPL @ 1m
  • SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Mounting: Flush mount to Talk-A-Phone ETP towers, wall mounts, boxes and pedestals
  • Connections: (1) RJ45 10 / 100 Base-T, (3) gel-filled butt connectors

Certifications

  • EWP
  • IP66
  • CE
  • Canada ICES
  • FCC Part 15
  • ADA
  • SIP