Surface Mount Plastic VoIP Entry Phone with Enhanced Weather Protection (EWP)
Model: E-20-IP-EWP
Surface Mount Plastic VoIP Entry Phone with Enhanced Weather Protection (EWP)
Model: E-20-IP-EWP
Find A Distributor
Product Details
The E-20-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-20-IP-EWP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers.
All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.
For outdoor installations where the unit is exposed to precipitation or condensation, model E-20-IP-EWP is equipped with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.
Applications
- Gate Entrance
- Parking ramps / lots
- ATM machines
- Medical centers
- Lobbies
- Entryways
- Stadiums
- Convention centers
- Public access areas
Features
- 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Handsfree operation
- Chassis: Impact resistant, UV stable, light grey Geloy plastic with black UV stable pad printed graphics, surface mount only
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Programming software included
- Network downloadable firmware
- Remotely programmable
- Diagnostics for testing mic, speaker, and relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Specifications
- Power: PoE class 1 (<4 Watts)
- Maximum Sound Pressure: 90dB SPL @ 1m
- Dimensions: 5.5″ x 4.5″ x 1.5″ (140mm x 115mm x 38mm)
- Shipping Weight: 1.5 lbs (0.75 kg)
- Operating Temperature: -40°F to 140°F (-40°C to 60°C)
- Humidity: Up to 100%
- Material: Impact resistant, UV stable, light grey Geloy plastic
- SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
- Audio Codecs: G711u, G711a, G722
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
- Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Certifications
- EWP
- IP66
- CE
- Canada ICES
- FCC Part 15
- SIP