E-30-PT – Viking Electronics

Stainless Steel Push-to-Talk Phone with Built-In Dialer

Find A Distributor

Product Details

The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E-30-PT assures that the called party’s voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended.

The E-30-PT features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.

For outdoor installations where the unit is exposed to precipitation or condensation, use model E-30-PT-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.


Applications

  • Non-ADA Hot-Line Phones for:
    • Terminals
    • Parking lots / ramps
    • Stadiums
    • Convention centers
    • ATM machines
  • Gate and Door Entry Phones for:
    • Business lobbies
    • Residences
    • Vehicular and Pedestrian gates

Downloads


Features

  • Push to talk button
  • Vandal Resistant Features:
    • 14 Gauge louvered 316 brushed stainless steel faceplate with permanent laser etched graphics
    • Speaker / mic screen
    • Heavy duty metal “Call” button
    • T-10 Torx security mounting screws and drive bit
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate, screws and push button switch
    • Switch internally sealed per IP67
    • Mylar speaker
    • Self draining mic mount
  • Volume adjustments for microphone and speaker
  • Telephone line powered
  • Non-volatile memory, no batteries required
  • Blue off-hook LED indicator
  • Dials up to 5 emergency numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
  • Selectable auto-answer feature for monitoring
  • Extended temperature range (-15°F to 130°F)
  • Flush mount using the included rough-in box or surface mount using a Viking VE-5×5 Surface Mount Box (DOD 424)

Specifications

  • Power: Telephone line powered (24VDC / 20mA minimum)
  • Overall Dimensions: 5″ x 5″ x 2.25″ (127mm x 127mm x 57mm)
  • Plastic Electrical Box: 4″ x 4″ x 2.12″ (102mm x 102mm x 54mm)
  • Shipping Weight: 2.2 lbs (1 kg)
  • Operating Temperature: -15°F to 130°F (-26°C to 54°C)
  • Humidity: 5% to 95% non-condensing
  • Material: 14 gauge 316 stainless steel with #4 brushed finish
  • Minimum Ring Voltage: 25VRMS
  • REN 0.5A
  • Connections: (2) gel-filled butt connectors

Certifications

  • FCC Part 68
  • FCC Part 15