E-35-IP - VoIP Door Entry Phone w/ Video Camera | Viking Electronics

Customer Service (715) 386-8861

VoIP Stainless Steel Entry Phone with Color Video Camera

Find A Distributor

Product Details

The E-35-IP VoIP Door Entry Phone is designed to provide quick and reliable handsfree entry communication for SIP VoIP phone systems with PoE. The E-35-IP Entry Phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The VoIp entry phone can dial up to 5 programmable numbers. On-board 2 Amp relay contacts are provided for activating doorstrikes or gate controllers. An optional RC-4A Secure Relay Controller can also be used. The E-35-IP Entry Phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. The unit is PoE powered.

For outdoor installations where the VoIP entry phone unit is exposed to precipitation or condensation, use model E-35-IP-EWP. For more information on Enhanced weather Protection (EWP), see DOD 859.


  • Gate Entrance
  • Parking ramps / lots
  • ATM machines
  • Medical centers
  • Lobbies
  • Entryways
  • Stadiums
  • Convention centers
  • Public access areas



  • Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
  • 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
  • Blue “Call Connected” LED indicator
  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for “Push to Talk” mode
  • Handsfree operation
  • T-10 Torx security screws for added security
  • Laser etched graphics
  • Programmable to dial up to 5 numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on busy signal, time-out or touch tone command
  • Programming software included
  • Network downloadable firmware
  • Remotely programmable
  • Diagnostics for testing mic, speaker, and relay
  • Flush mounts using the included rough-in box or surface mount using a Viking VE-5X5 Surface Mount Box (DOD 424)
  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)


  • Power: PoE class 1 (<4 Watts)
  • Camera Power: 120VAC / 12VDC 500mA UL listed adapter provided or 6-22VDC 150mA
  • Maximum Sound Pressure: 90dB SPL @ 1m
  • Overall Dimensions: 5.0″ x 5.0″ x 2.25″ (127mm x 127mm x 57mm)
  • Plastic Electrical Box: 4″ x 4″ x 2.12″ (102mm x 102mm x 54mm)
  • Shipping Weight: 2.1 lbs (1.0 kg)
  • Operating Temperature: -40°F to 140°F (-40°C to 60°C)
  • Humidity: 5% to 95% non-condensing
  • Material: 14 gauge 316 stainless steel with #4 brushed finish
  • SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Image Sensor: 1/4″ color CMOS
  • Video Output: 1VP-P composite, NTSC, 75 Ohms
  • Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
  • Sensitivity: 0.025 LUX (50 IRE) F1.2 3200K
  • Lens: 2.1mm, conical pinhole
  • Field of View: 80° Horizontal, 60° Vertical, 100° Diagonal
  • Tilt / Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30°
  • Connections: (1) RJ45 10/100 Base-T, (6) gel-filled butt connectors (3M Scotchlok UR2)


  • CE
  • Canada ICES
  • SIP