Single Gang Stainless Steel Entry Phone
Model: E-40-SS
Product Details
The E-40-SS entry phone is a compact, weather and vandal resistant, telephone line powered speaker phone designed to provide two-way handsfree audio communication. The E-40-SS’s compact size allows it to be mounted in a standard single gang electrical box. The E-40-SS’s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming calls.
The E-40-SS entry phone can share a single phone line with house or small business telephones when used with a Viking C-200, C-250, C-500 or C-2000B Entry Phone controller. The E-40-SS entry phone can also be connected to an unused analog station port (programmed for ringdown) on a phone system or connected directly to a telephone line when used with a Viking K-1900-5 or K-1900-30 auto dialer. The E-40-SS features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.
Replacement faceplates (PNL40-SS) can be purchased separately.
For outdoor installations where the unit is exposed to precipitation or condensation, use model E-40-SS-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.
Applications
- Door or gate communication, business delivery entrances
- Use with a Viking C-200 or C-250 to control E-40-SS on a single line
- Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-40-SS’s and door/gate control on a single phone line
- Use with a Viking C-2000B to control 1 to 4 E-40-SS’s and door/gate control on a single phone line
- Provide unique front and back door chimes and paging when used with a Viking SLP-1, SLP-4 and C-2000B
- Residential, commercial and industrial door security
- Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports
- Use on any analog PABX station port with programmable ringdown capability
Features
- Compact size – Front panel is the size of a typical single gang mid-size wall plate
- Mounting:
- Flush mounts in a single gang electrical box (2.25″ deep x 2.00″ wide x 2.84″ tall minimum)
- Surface mounts in a Viking model VE-3X5 (not included, see DOD 424) for mounting on a wall, post or VE-GNP Gooseneck Pedestal (E-40-SS-EWP recommended)
- Vandal Resistant Features:
- 18 gauge 304 stainless steel faceplate
- 316 stainless steel push button
- fiberglass reinforced plastic speaker screen
- scratch resistant powder coating
- hex drive mounting screws
- Weather Resistant Features:
- Mylar speaker
- faceplate gasket
- mic and speaker gasket
- internally sealed (IP67) push button switch
- self draining mic mount
- UV stable weather resistant powder coating
- Telephone line powered
- Microphone and speaker volume controls
- Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
- Selectable auto answer feature for monitoring
- Programmable VOX (mic/speaker) switching speed
- Blue LED helps locate push button, indicate ringing and off hook
Specifications
- Power: Telephone line powered (24VDC / 20mA minimum)
- Faceplate Dimensions: 4.875″ x 3.125″ x 0.18″ (123.8mm x 79.4mm x 4.6mm)
- Phone Dimensions: 2.84″ x 1.8″ x 1.65″ (72mm x 46mm x 42mm)
- Shipping Weight: 1.0 lbs (0.45 kg)
- Operating Temperature: -30° F to 150° F (-34° C to 65° C)
- Humidity: 5% to 95% non-condensing humidity
- Material: 18 gauge 304 stainless steel faceplate with #4 brushed finish
- Speaker Volume: Approximately 62db maximum @ 1m
- Ring Voltage: 25V AC RMS minimum (for auto answer)
- CPC Disconnect Time: 300ms minimum
- REN: 0.8A
- Connections: (2) gel-filled butt connectors
