Menu

Double Gang VoIP Entry Phone with Enhanced Weather Protection, White Finish

Model: E-60-WH-IP-EWP

  • Compact: Front panel is the size of a typical double gang mid-size wall plate
  • Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.65” wide x 2.84” tall minimum) or surface mounts in an optional VE 5×5 (see DOD 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended)
  • Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Textured Black and Satin White
  • PNL-60 faceplates: Replacement faceplates with matching screws available in all four standard finishes
  • Self diagnostic reports via email (testing com, microphone, speaker, and switch)
  • Automatic polling and programming software included
  • 2 Amp relay contacts for door / gate or SL-2 strobe light control
  • Blue LED indicator
  • SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
  • Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) for proper operation in noisy environments
  • VoIP eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Can be used with optional RC-4A Secure Relay Controller (DOD 582)
  • Handsfree operation
  • Programmable to dial up to 5 numbers on busy or ring no answer
  • Cycles through backup phone numbers on busy or no-answer
  • Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Extended temperature range (-40°F to 140°F)
  • Volume adjustments for microphone and speaker
  • Optional PB-100 Polling System available (DOD 232)
  • Optional SL-2 or BLK-4-EWP strobe light kit available (DOD 242 and 653)
View all features
Add to Pick List Added to Pick List

Questions?

We are here to help!

Product Details

The E-60-WH-IP-EWP is a compact, vandal resistant VoIP entry phone designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-60-WH-IP-EWPP VoIP entry phone can be programmed from any touch tone phone, PC, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers. On-board 2 Amp relay contacts are provided for activating doorstrikes or gate controllers. For added security, an optional RC-4A Secure Relay Controller can also be used.

The E-60-WH-IP-EWP features a blue LED that continually provides light for locating the push button in dark locations, flashes during dialing, and automatically lights again when the call is answered. The VoIP entry phone unit is PoE powered and all programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries.

The compact size of the E-60-WH-IP-EWP entry phone allows it to be flush mounted in a standard double gang electrical box. Surface mount options are also available using Viking’s VE-5×5 Series Surface Mount Boxes. Replacement faceplates can be purchased separately, see model PNL60-SS.

The E-60-WH-IP-EWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD 859.

white double gang voip entry phone with ewp

Applications

  • Gate Entrance
  • Parking ramps/lots
  • ATM machines
  • Medical centers
  • Lobbies
  • Entryways
  • Stadiums
  • Convention centers
  • Public access areas

Features

  • Compact: Front panel is the size of a typical double gang mid-size wall plate
  • Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.65” wide x 2.84” tall minimum) or surface mounts in an optional VE 5×5 (see DOD 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended)
  • Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Textured Black and Satin White
  • PNL-60 faceplates: Replacement faceplates with matching screws available in all four standard finishes
  • Self diagnostic reports via email (testing com, microphone, speaker, and switch)
  • Automatic polling and programming software included
  • 2 Amp relay contacts for door / gate or SL-2 strobe light control
  • Blue LED indicator
  • SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
  • Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) for proper operation in noisy environments
  • VoIP eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Can be used with optional RC-4A Secure Relay Controller (DOD 582)
  • Handsfree operation
  • Programmable to dial up to 5 numbers on busy or ring no answer
  • Cycles through backup phone numbers on busy or no-answer
  • Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Extended temperature range (-40°F to 140°F)
  • Volume adjustments for microphone and speaker
  • Optional PB-100 Polling System available (DOD 232)
  • Optional SL-2 or BLK-4-EWP strobe light kit available (DOD 242 and 653)

Certifications

  • EWP
  • IP66
  • CE
  • Canada ICES
  • FCC Part 15
  • SIP

Specifications

  • Power: PoE class 1 (<4 Watts)
  • Maximum Sound Pressure: 89 dB SPL @ 1 m
  • Dimensions: Faceplate: 123.8 mm x 125.4 mm x 4.3 mm (4.875” x 4.938”x 0.17”), Phone: 72 mm x 46 mm x 42 mm (2.84” x 1.8” x 1.65”)
  • Shipping Weight: 0.55 kg (1.2 lbs)
  • Operating Temperature: -40°C to 60°C (-40°F to 140°F)
  • Humidity – Standard Products: 5% to 95% non-condensing
  • Humidity – EWP Products: Up to 100%
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE802.3af PoE, SIP 2.0 RFC3261, 100BASE-TXwith auto cross over
  • Regulatory Compliance: FCC Part 15, CE, and Canada ICES-3 Class A
  • Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors


Questions?

We are here for you!

Contact Us