ES-3 - Viking Electronics

Customer Service (715) 386-8861

Add Entry Points to a Viking AES-2000 or AES-2005 Accessible Entry System

Find A Distributor

Product Details

Up to 32 additional points of entry can be added to Viking’s model AES-2000/AES-2005 Accessible Entry System. One ES-3, one Wiegand device and a door strike or magnetic lock of your choice is required for each additional entry point.

The ES-3 is an entry system door controller designed to operate a door strike or magnetic lock upon receiving a valid card read from a Wiegand device. The ES-3 can be used with any Viking or other proximity reader, RF transmitter, or digital keypad that outputs 26 bit Wiegand format. Up to 525 valid Wiegand codes can be programmed into the AES-2000/AES-2005, and up to 1024 access entry events are logged and stored in the AES-2000/AES-2005. Other programmable parameters, like relay activation and delay times, are also PC programmed via the AES-2000/AES-2005.

Only one pair of wires are needed to wire all 32 Entry System Door Controllers back to the AES-2000/AES-2005. This two wire CAN communication protocol allows the ES-3 to be installed up to 1 mile away. A door sensor input monitors for a forced door or door ajar condition. A Request to Exit input operates the doors for people leaving the controlled area. Three separate relay outputs allow control of Door Strikes, Magnetic Locks, Gate Opener, Lights, Camera and or Alarm. Power to the ES-3 can be daisy chained from unit to unit on a single pair of wires, or simply tap into the local door strike power supply.


Applications

  • High rise apartment buildings
  • Condos
  • Senior citizen buildings
  • Assisted care centers
  • Retirement homes
  • Gated communities

Features

  • Up to 525 tenants
  • Up to 32 entry points are possible
  • Logs up to 1024 entry events
  • Compatible with Viking models PRX-1, PRX-2, PRX-3, PRX-4, PRX-5, LRR-4 and certain legacy 125KHz HID® proximity card readers*
  • Two wire CAN communication protocol can be daisy-chained together
  • Use supplied power adapter or share with the doorstrike 12-24 Volt AC or DC power source
  • Inputs may be either normally open (NO) or normally closed (NC) contacts
  • Relay outputs provide either normally open (NO) or normally closed (NC) contacts

Specifications

  • Power: Any 12-24V AC or DC source @ 300mA, 12V DC adapter included (designed to share power with the door strike power supply)
  • Dimensions: 5.25” x 3.5” x 1.75” (133mm x 89mm x 44mm)
  • Shipping Weight: 3 lbs (1.3 kg)
  • Environmental: 32°F to 90°F (0°C to 32°C) with 5% to 95% non-condensing humidity
  • Relay Contact Ratings: 3A @ 30V DC/250V AC maximum
  • Maximum CAN Length: 0.8 Km (2600 ft) using 24 AWG twisted pair, 1.6 Km, (5300 ft) using 2 pairs of 24 AWG twisted pair
  • Maximum Wiegand Run (24 AWG): PRX-1: 122m (400 ft), PRX-2: 53m (175 ft), PRX-3 (using 3 pairs for power): 91m (300 ft), PRX-4: 244m (800 ft)­­­­
  • Connections: 18 screw terminals

* HID and the HID logo are registered trademarks of HID Global Corporation, an ASSA ABLOY company. All other trademarks are the property of their respective owners.