K-1900-7 | Stainless Steel Hotline Panel Phone | Viking Electronics

Customer Service (715) 386-8861

Vandal Resistant Hot-Line Stainless Steel Panel Phone

Find A Distributor

Product Details

The K-1900-7 panel hot-line phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-7 hot-line phone housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily touch tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1900-7-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.


Applications

  • Catalog sales
  • Kiosks
  • Courtesy and customer service phones
  • Automated tellers (ATM’s)
  • Hot-line reservation phones
  • Security and emergency phones
  • Replaces leased ringdown circuits
  • Gate/entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Downloads


Features

  • Vandal Resistant Features:
    • 12 gauge (0.105″ thick) 316 stainless steel front panel
    • Permanent laser etched graphics
    • Metal handset cradle
    • Armored handset cable
    • Hex drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate
    • Marine grade 316 stainless steel hex drive screws
    • Gaskets (on EWP models)
  • Auto dials one programmable speed dial number (up to 32 digits)
  • Touch tone or pulse dialing
  • Non-volatile memory (no batteries required)
  • Operates on analog PABX and key system extensions or analog Centrex and CO lines
  • Programmable 6 digit security code
  • Touch tone programmable
  • 36” armored handset cable
  • Programmable pre-dial pause
  • Blocks fraudulent calls from hand held pocket dialers
  • Hearing aid compatible amplified handset with sealed ­­push button volume control
  • Programmable default volume level
  • Programmable volume control disable
  • Flush mount using a standard double-gang box (not included)
  • Surface mount using an optional VE-5×10 surface mount box (not included, see DOD 424)

Specifications

  • Power: Telephone line powered (20V DC/18mA minimum)
  • Standard Dimensions: 5.0” x 10.0” x 5.1” (127 mm x 254 mm x 130 mm)
  • Shipping Weight: 4 lbs. (1.8 kg )
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity: 5% to 95% non-condensing
  • ­­­­Handset Cable Length: 34” to 37” (86 cm to 94 cm)
  • Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
  • Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
  • Connections: (2) gel-filled butt connectors

Certifications

  • FCC Part 68
  • FCC Part 15