K-1900-8-IP-EWP - VoIP Steel Hot-line Phone w EWP | Viking Electronics

Customer Service (715) 386-8861

Vandal Resistant VoIP Phone with Auto Dialer, Keypad, Entry System and Enhanced Weather Protection

Find A Distributor

Product Details

The K-1900-8-IP-EWP VoIP panel hot-line phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone. The K-1900-8-IP-EWP VoIP phone is designed to provide quick and reliable communication for SIP VoIP phone systems with PoE. The unit can be programmed from any PC on the same LAN or remotely using a Static IP Address. The K-1900-8-IP-EWP phone can dial up to 250 programmable numbers and another 250 rollover numbers.

When a call initiated by the K-1900-8-IP-EWP phone is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may be programmed, providing tenants with keyless entry. A 26 Bit Wiegand input is provided for adding a Viking proximity card reader with capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers can be programmed to only allow access at specific times and / or day of the week. A request for exit (REX) input is included for easy exiting. The K-1900-8-IP-EWP also has automatic event logging allowing you to review the time and date of the call, which door was open / closed, what keyless entry code or proximity card was used, request for exit usage and whether it was an inbound or outbound call.

The K-1900-8-IP-EWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more info on EWP, see DOD 859.


Applications

  • Apartment Entry Phone
  • Commercial Gate Entrance
  • Courtesy Assistance Phone
  • Customer Service Phone
  • Hot-Line Phone
  • Door Entry Phone
  • Kiosk Phone with up to 250 number speed dialing

Features

  • Vandal Resistant Features:
    • 12 gauge 316 stainless steel faceplate
    • Permanent laser etched graphics
    • Heavy duty metal hook switch
    • Heavy duty metal keypad
    • 54″ armored handset cable
    • T-10 Security Torx drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate
    • Marine grade 316 stainless steel Torx security screws
    • Internally sealed keypad
    • Equipped with Enhanced Weather Protection (EWP)
    • Faceplate gasket (on EWP models)
  • Ring with adjustable volume and cadence
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Two sets of SPDT 2 Amp relay contacts for door/gate or camera control­­­
  • Optional RC-4A for Secure Remote Relay Control, see DOD 582
  • SIP compliant
  • PoE powered (class 1, <4 Watts)­­­
  • Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
  • Network downloadable firmware
  • 54” armored handset cable
  • Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Programmable to speed dial up to 250 numbers
  • 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
  • 26 Bit Wiegand output connect to card reader input of an Access Control System
  • Cycles to rollover phone number on busy or no-answer
  • Program up to 1,000 keyless entry codes­­­ and/or proximity card numbers
  • Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
  • ­­­Event logging with time and date stamp
  • Remotely programmable
  • Extended temperature range (-40°F to 140°F)
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)
  • Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
  • Diagnostics (for testing relay)­­­­­­­­­

Specifications

  • Power: PoE class 2 (<6.5 Watts)
  • Dimensions for EWP Model
    • Phone only: 5.0” x 10.0” x 4.75” (127 mm x 254 mm x 121 mm)
    • Including rough-in box: 5.0” x 10.0” x 5.61” (127 mm x 254 mm x 143 mm)
  • Shipping Weight: 5.3 lbs (2.4 kg)
  • Operating Temperature: -40°F to 140°F (-40° C to 60° C)
  • Humidity – Standard Model: 5% to 95% non-condensing
  • Handset Cable Length: 52” to 57” (132cm to 145cm)
  • Audio Codecs: G711u, G711a, G722
  • Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
  • Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A­­­
  • Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors

Certifications

  • EWP
  • IP66
  • CE
  • FCC Part 15
  • SIP