K-1900-8 | Steel Panel Hotline Phone w Armored Cable | Viking Electronics

Customer Service (715) 386-8861

Vandal Resistant Hot-Line Panel Phone with Armored Cable and Stainless Steel Keypad

Find A Distributor

Product Details

The K-1900-8 hot-line panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard touch tone phone. The hot-line unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-8 housing consists of a heavy gauge stainless steel panel, metal touch tone keypad, armored cable, heavy duty handset, and all metal cradle. The K-1900-8 hot-line panel phone can be easily touch tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1900-8-EWP. For more information on Enhanced Weather Protection (EWP), see DOD 859.


  • Catalog sales
  • Kiosks
  • Courtesy and customer service phones
  • Automated tellers (ATMs)
  • Hot-Line reservation phones
  • Security and emergency phones
  • Replaces leased ringdown circuits
  • Gate / entrance communication in noisy locations (diesel trucks, factory noise, etc.)



  • Auto dials one programmable speed dial number (up to 32 digits)
  • Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
  • Touch tone or pulse dialing
  • Non-volatile memory, no batteries required
  • Operates on analog PABX and key system extensions or analog Centrex and CO lines
  • Programmable 6 digit security code
  • Touch tone programmable
  • Vandal Resistant Features:
    • 0.105″ thick 316 stainless steel panel with permanent laser etched graphics
    • Armored cable
    • Metal cradle
    • Heavy duty metal keypad
    • Hex drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate and screws
    • Sealed keypad
  • Armored 36″ handset cord
  • Programmable pre-dial pause
  • Blocks fraudulent calls from hand held pocket dialers
  • Limited toll restriction in standard touch tone phone mode
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Programmable default volume level
  • Programmable volume control disable
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box (DOD 424)


  • Power: Telephone line powered (20VDC / 18mA)
  • Phone Dimensions: 5.0″ x 10.0″ x 4.54″ (127mm x 254mm x 113mm)
  • Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
  • Shipping Weight: 4 lbs (1.8 kg)
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity: 5% to 95% non-condensing
  • Panel Material: 0.105″ thick stainless steel
  • Handset Cable Length: 34″ to 37″ (86cm to 94cm)
  • Touch Tone Dial Speed: Normal – 120ms on / off, Fast – 50ms on / off
  • Pulse Dial Speed: Normal – 10pps, Fast – 20pps
  • Connections: (2) gel-filled butt connectors


  • FCC Part 68
  • FCC Part 15