K-1900-812L-EWP - Viking Electronics

Customer Service (715) 386-8861

Vandal Resistant Hot-Line Panel Phone with 12" Armored Cable, Internal Lanyard, Keypad, and Enhanced Weather Protection

Find A Distributor

Product Details

The K-1900-812L-EWP hot-line panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard touch tone phone. The hot-line unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-812L-EWP hot-line phone features a 12″ armored cable with an internal stainless steel lanyard for increased strength and vandal resistance. The phone housing consists of a heavy gauge stainless steel panel, metal touch tone keypad, armored cable, heavy duty handset, and all metal cradle. The K-1900-812L-EWP hot-line panel phone can be easily touch tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

The K-1900-812L-EWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more info on EWP, see DOD 859.


Applications

  • Catalog sales
  • Kiosks
  • Courtesy and customer service phones
  • Automated tellers (ATMs)
  • Hot-Line reservation phones
  • Security and emergency phones
  • Replaces leased ringdown circuits
  • Gate / entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Features

  • Vandal Resistant Features:
    • 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
    • Armored handset cable
    • Metal cradle
    • Heavy duty metal keypad
    • Hex drive mounting screws
  • Weather Resistant Features:
    • Marine grade 316 stainless steel faceplate
    • Marine grade 316 stainless steel screws
    • Internally sealed keypad
    • Gaskets (on EWP models)
    • Equipped with Enhanced Weather Protection (EWP)
  • Auto dials one programmable speed dial number (up to 32 digits)
  • Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
  • Touch tone or pulse dialing
  • Non-volatile memory, no batteries required
  • Operates on analog PABX and key system extensions or analog Centrex and CO lines
  • Programmable 6 digit security code
  • Touch tone programmable
  • Armored 12″ handset cable with an internal stainless steel lanyard for additional cable strength
  • Programmable pre-dial pause
  • Blocks fraudulent calls from hand held pocket dialers
  • Limited toll restriction in standard touch tone phone mode
  • Hearing aid compatible amplified handset with sealed push button volume control
  • Programmable default volume level
  • Programmable volume control disable
  • Equipped with Enhanced Weather Protection (EWP) – EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
  • Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
  • Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)

Specifications

  • Power: Telephone line powered (20V DC/18mA minimum)
  • Dimensions for Standard Model
    • Phone : 5.0” x 10.0” x 4.54” (127mm x 254mm x 113mm)
    • With rough-in box: 5.0” x 10.0” x 5.53” (127mm x 254mm x 141mm)
  • Shipping Weight: 5 lbs (2.3 kg )
  • Operating Temperature: -30°F to 140°F (-34°C to 60°C)
  • Humidity – Standard Model: 5% to 95% non-condensing
  • Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)
  • Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
  • Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
  • Connections: (2) gel-filled butt connectors

Certifications

  • EWP
  • FCC Part 68
  • FCC Part 15