Voice Alarm Dialing from Two Inputs
Model: K-202-DVA
Product Details
Viking’s K-202-DVA is a fully programmable two-input, multi-number auto dialer, designed for emergency and non-emergency message notification. The K-202-DVA has two dry contact inputs, each of which can dial up to seven 32-digit phone numbers and play a message up to one minute in length specific to that input. The messages can be recorded locally or remotely.
The K-202-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.
Programming is easily done with a touch tone phone.
Applications
- Security / burglar / fire alarm notification
- System alarm or equipment malfunction notification
- Operating temperature warning notification
- Contacting personnel via numeric pagers
Features
- Non-volatile memory, no batteries required
- Stores up to seven 32-digit phone numbers per input (fourteen 32-digit numbers total)
- 2 minutes of record time (1 minute per input)
- Programmable message repeat counter
- Programmable lap counter
- Two inputs programmable for normally open or normally closed and enabled or disabled
- Programmable ring delay for remote programming and alarm polling
- Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
- Programmable resume timer for each input (time following reset for input to become active again)
- Call progress detection
- Programmable ringback limit for call progress
- Remote security and access codes
- Local or remote programming and recording
- Compatible with the RC-2A and RC-3 remote DTMF controllers
- Phone numbers may be programmed as pager numbers (no voice message played)
- Programmable hookswitch flash before dialing
- Local reset input
- Local alarm state indication LED
Specifications
- Power: 120VAC / 12VDC 500 mA UL listed adapter provided
- Dimensions: 5.25″ x 3.6″ x 1.75″ (133mm x 91mm x 44mm)
- Shipping Weight: 1.5 lbs (0.68 kg)
- Operating Temperature: 32°F to 90°F (0°C to 32°C)
- Humidity: 5% to 95% non-condensing
- Talk Battery: 12VDC
- Touch Tone Dialing Speed: Normal – 100ms on / off, Fast – 50ms on / off
- Minimum CPC Detection Time: 320ms
- Total Message Record Time: 2 minutes
- Sampling Rate: 64K (equivalent)
- Input Detection Time: 90ms with Qualifier Timer set to 0
- Resolution Qualifier Timer: 1 second to 18 hours
- Resolution Resume Timer: 1 second to 18 hours
- Connections: (1) RJ11 jack for telco connection, (6) cage clamp screw terminals
