It is common for IP based network cameras to have two-way audio connections. When this is the case, the MSB-30-EWP can be added to turn your IP network camera into a VoIP (Voice over Internet Protocol) video phone, allowing both voice and video to stream over the internet. If the camera already has a tiny speaker and microphone, the MSB-30-EWP can be added to get better and louder sounding audio by using the audio input and output connections provided by the camera. The MSB-30-EWP has a microphone, a speaker, and a momentary push button housed in a stainless steel flush mount panel. An optional Viking surface mount box can be used to mount the unit to a wall or pedestal.
The MSB-30-EWP line level audio input and output connections can be directly connected to the IP camera’s line level audio output and input connections for two-way voice communications. A built-in 2 Watt amplifier powers the internal speaker, and there are volume controls to adjust both the speaker volume and microphone sensitivity. The 2 Watt amplifier can be used to power an auxiliary speaker for even greater volume and coverage.
The MSB-30-EWP also has a momentary “CALL” button switch which can provide a momentary contact closure to trigger the IP network camera, or ring a door bell. The front panel blue LED lights continuously to show the unit is powered, and to help identify the “CALL” button location at night. An external contact closure can be used to turn off the blue LED, or simply wire it in parallel with the momentary “Call” button switch to make the blue LED wink off when the button is pressed.
The MSB-30-EWP is equipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more information, see DOD 859.
Use with IP camera to add video and two-way voice communications for: